manualshive.com logo in svg

NXP Semiconductors MWCT101 S Series, Reference Manual

Share
Download
NXP Semiconductors MWCT101 S Series Reference Manual Download Page 1074

CMPx_C2 field descriptions

Field

Description

31

RRE

Round-Robin Enable

This bit enables the round-robin operation.

0

Round-robin operation is disabled.

1

Round-robin operation is enabled.

30

RRIE

Round-Robin interrupt enable

This bit enables the interrupt/wake-up when the comparison result changes for a given channel.

0

The round-robin interrupt is disabled.

1

The round-robin interrupt is enabled when a comparison result changes from the last sample.

29

FXMP

Fixed MUX Port

This bit is used to fix the analog mux port for the round-robin mode.

0

The Plus port is fixed. Only the inputs to the Minus port are swept in each round.

1

The Minus port is fixed. Only the inputs to the Plus port are swept in each round.

28

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

27–25

FXMXCH

Fixed channel selection

This field indicates which channel in the mux port is fixed in a given round-robin mode.

000

Channel 0 is selected as the fixed reference input for the fixed mux port.

001

Channel 1 is selected as the fixed reference input for the fixed mux port.

010

Channel 2 is selected as the fixed reference input for the fixed mux port.

011

Channel 3 is selected as the fixed reference input for the fixed mux port.

100

Channel 4 is selected as the fixed reference input for the fixed mux port.

101

Channel 5 is selected as the fixed reference input for the fixed mux port.

110

Channel 6 is selected as the fixed reference input for the fixed mux port.

111

Channel 7 is selected as the fixed reference input for the fixed mux port.

24

Reserved

This field is reserved.
This read-only field is reserved and always has the value 0.

23

CH7F

Channel 7 input changed flag. This bit is set if the channel 7 input changed from the last comparison with
the fixed mux port.

22

CH6F

Channel 6 input changed flag. This bit is set if the channel 6 input changed from the last comparison with
the fixed mux port.

21

CH5F

Channel 5 input changed flag. This bit is set if the channel 5 input changed from the last comparison with
the fixed mux port.

20

CH4F

Channel 4 input changed flag. This bit is set if the channel 4 input changed from the last comparison with
the fixed mux port.

19

CH3F

Channel 3 input changed flag. This bit is set if the channel 3 input changed from the last comparison with
the fixed mux port.

18

CH2F

Channel 2 input changed flag. This bit is set if the channel 2 input changed from the last comparison with
the fixed mux port.

17

CH1F

Channel 1 input changed flag. This bit is set if the channel 1 input changed from the last comparison with
the fixed mux port.

Table continues on the next page...

Memory map/register definitions

MWCT101xS Series Reference Manual, Rev. 3, 07/2019

1074

NXP Semiconductors

Summary of Contents for MWCT101 S Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands