![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081244.webp)
BUS Updated 12/2011
07/2011
4-186
WorkCentre 5335 Family Service Documentation
REP 19.9, REP 19.10
Initial Issue
Repairs & Adjustments
REP 19.9 HCF Casters
Parts List on
PL 10.8
Removal
1.
Switch off the power and disconnect the power cord.
2.
Un-dock the HCF (
REP 19.3
).
3.
Remove all paper from the HCF Tray.
4.
Roll the HCF away from the copier/printer.
5.
Turn the HCF over onto its left side to expose the casters on the underside of the HCF.
6.
Remove (3) installation screws per caster.
Replacement
1.
Install a new caster or casters, by tightening the (3) installation screws per caster.
2.
Turn the HCF back up to an upright position.
3.
Roll the HCF back toward the copier/printer.
4.
Place previously removed paper, or fresh paper, into the HCF Tray.
5.
Dock the HCF.
REP 19.10 HCF Takeaway Roll
Parts List on
PL 10.7
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the HCF Feed Motor (
REP 19.12
).
3.
Remove the Lower Chute (
Figure 1
).
•
Remove the (2) securing screws.
Figure 1 Removing the Lower Chute
4.
Slide the Takeaway Roll to the right until the left side is released, then lower the roll to
remove.
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
After replacing, reset
HFSI Counter
954-805.
Takeaway Roll (includes Shaft)