BUS Updated 12/2011
07/2011
2-133
WorkCentre 5335 Family Service Documentation
012-966, 012-969
Status Indicator RAPs
Initial Issue
012-966 Scratch Sheet Compile RAP
Paper was detected that was either out of spec, in poor condition (wrinkled, curled) and was
ejected to the compiler.
NOTE: This Code is an operation message. If this fail code is frequently declared, perform the
procedure below.
Initial Actions
•
Check that the Top Cover can be opened and closed.
•
Power Off/On.
Procedure
Check the specifications of paper. The paper is in spec.
Y
N
Replace the paper with new paper that is in spec.
Check the condition of the paper. The paper is in normal condition without any problem
that causes the paper to be bent (dog eared) or jam.
Y
N
Resolve any problem that causes the paper to be bent or caught.
Check for a Fault Code. Another Fault Code is displayed.
Y
N
If the problem continues, replace the Finisher PWB (
PL 23.16
).
Go to the appropriate Fault Code.
012-969 IOT Center Tray Full RAP
The H-Transport Entrance Sensor is detected to be ON for 10 successive seconds.
Procedure
Go to the
012-126
RAP.