![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081190.webp)
BUS Updated 12/2011
07/2011
4-131
WorkCentre 5335 Family Service Documentation
REP 12.25
Repairs & Adjustments
Initial Issue
Figure 2 Removing the KL-Clips
6.
Remove the Eject Shaft from the Front/Rear Tamper Motor Assembly (
Figure 3
):
(1)Move Bearings (2) in the direction of the arrow.
(2)Remove Eject Shaft in the direction of the arrow.
(3)Remove Belt from Pulley.
Figure 3 Removing the Eject Shaft
Replacement
1.
Reverse the removal procedure for replacement.
2.
Install and align the Eject Belt with marks on the Pulleys (
Figure 4
) (
Figure 5
):
Figure 4 Align Eject Belt
Figure 5 Align Eject Belt