![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308202.webp)
BUS Updated 12/2011
07/2011
2-189
WorkCentre 5335 Family Service Documentation
016-509, 016-510
Status Indicator RAPs
Initial Issue
016-509 Image Log RAP
BSD-ON:
BSD 16.1 - ESS
The Image Log block send command 1 in the HDD failed. With the system data "Auto Transfer
Setting" set to "Transfer by the job," transfer rules are not registered, causing a job to be dis-
continued.
Initial Actions
Power Off/On
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power. Register rules for transfer from the destination image log control
server to the device.
If the problem persists perform
Initialize Hard Disk
.
If the problem persists perform
GP 16
Special Boot Modes HDD Initialization.
If the problem persists, replace the HDD (
PL 35.2
).
016-510 Image Log RAP
BSD-ON:
BSD 16.1 - ESS
The Image Log block send command 2 in the HDD failed.
Initial Actions
Power Off/On. Rules for log image transfer are not registered. Because transfer rules are not
registered, a transfer fails. Register rules for transfer from the destination image log control
server to the device.
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform
Initialize Hard Disk
.
If the problem persists, replace the HDD (
PL 35.2
).