![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081198.webp)
BUS Updated 12/2011
07/2011
4-140
WorkCentre 5335 Family Service Documentation
REP 13.3, REP 13.4
Initial Issue
Repairs & Adjustments
REP 13.3 H-Transport Belt (Office Finisher LX)
Parts List on
PL 23.4
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the H-Transport Assembly (
REP 13.1
).
3.
Remove the screws (2) on the H-Transport Rear Cover and remove the Cover.
4.
Loosen the screws (2) on the Tension Bracket (
Figure 1
).
5.
Remove the Belt.
Figure 1 Removing the H-Transport Belt
Replacement
Install the H-Transport Belt in reverse order of removal.
REP 13.4 H-Transport Motor (Office Finisher LX)
Parts List on
PL 23.4
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the H-Transport Assembly (
REP 13.1
).
3.
Remove the H-Transport Rear Cover.
4.
Place the H-Transport top down on a work surface.
5.
Remove the H-Transport motor (
Figure 1
).
Figure 1 Removing the H-Transport Drive Motor
Replacement
Replace in reverse order of removal.
1
Loosen the screws (2)
2
Remove the Belt
1
Remove the
Screw and
remove the
Shield.
3
Loosen the Screws (2)
to remove Belt Tension.
4
Remove the Screws
(2) and remove the
Motor.
2
Disconnect the
Connector