![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308063.webp)
BUS Updated 12/2011
07/2011
2-47
WorkCentre 5335 Family Service Documentation
003-933, 003-934
Status Indicator RAPs
Initial Issue
003-933 300 DPI Scan RAP
BSD-ON:
BSD 3.5 - ESS-DADF Communication
Scanning in the DADF mix duplex mode, 300dpi, 400dpi and 600dpi are not available (when
the next document exists). Because Page Memory is insufficient, a selected resolution is not
available for scanning an A3 document. It is available for scanning an A4/B4 document.
Procedure
•
Verify scan settings (Operate for scanning at below 300dpi) are correctly set and menu
selections are correctly set. Increase Page Memory (
PL 35.2
).
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)
003-934 400 DPI Scan RAP
BSD-ON:
BSD 3.5 - ESS-DADF Communication
When scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available (when the
next document exists). Because Page Memory is insufficient, a selected resolution is not avail-
able for scanning an A3 document. It is available for scanning an A4/B4 document.
Procedure
•
Verify scan settings (at below 400dpi) are correctly set and menu selections are correctly
set. Increase Page Memory (
PL 35.2
).
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)