![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081127.webp)
BUS Updated 12/2011
07/2011
4-66
WorkCentre 5335 Family Service Documentation
REP 8.5
Initial Issue
Repairs & Adjustments
REP 8.5 Feed, Nudger, Retard Roll
Parts List on
PL 11.10
Removal
NOTE: The replacement procedure shows Feeder 1 Feed, Nudger, and Retard Rolls; the pro-
cedure for Feeders 2, 3, and 4 are the same.
NOTE: The Feed, Nudger, and Retard Rolls (3) must be replaced at the same time.
NOTE: After replacing the Feed, Nudger, and Retard Rolls reset the
HFSI Counter
for that
feeder.
1.
Remove the Paper Tray
REP 7.1
.
2.
Slide the guide to the front (
Figure 1
).
Figure 1 Guide
3.
Remove the Feed, Nudger, and Retard Rolls (3) (
Figure 2
).
a.
Release the locking tab and slide the roll off the shaft.
Figure 2 Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
Guide
Locking tab