![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081187.webp)
BUS Updated 12/2011
07/2011
4-128
WorkCentre 5335 Family Service Documentation
REP 12.23
Initial Issue
Repairs & Adjustments
Figure 2 Removing the Bottom Plate
9.
Remove the Stacker Tray (
Figure 3
):
(1)Release wires from Clamps (5)
(2)Disconnect the Connector
(3)Remove Screws (7)
(4)Remove the Stacker Tray
Figure 3 Removing the Stacker Tray
10. Remove the screws securing the Eject/Set Clamp Motor Assembly (
Figure 4
):
(1)Release Clamps (2) and remove the wire.
(2)Remove Screws (2).
(3)Remove Self-tapping Screws (2).
Figure 4 Removing Screws
11.
Remove the Eject/Set Clamp Motor Assembly (
Figure 5
):
(1)Remove Belts (2) from Pulley.
(2)Remove Eject/Set Clamp Motor Assembly.
Figure 5 Removing the Eject/Set Clamp Motor Assembly
Replacement
1.
Reverse the removal procedure for replacement.