![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308242.webp)
BUS Updated 12/2011
07/2011
2-229
WorkCentre 5335 Family Service Documentation
016-700, 016-701
Status Indicator RAPs
Initial Issue
016-700 Password is Under Minimum RAP
Job with password of which number of digit is below the minimum value for a password is
received.
Make the minimum number of password digit for Security Print and Authentication Print setta-
ble. Do not store job with password of which number of digit is below the minimum value.
Procedure
Increase the number of digit of the password of desired print job to a value larger than the min-
imum.
016-701 ART EX Memory Expended RAP
Insufficient memory was detected while using the ART EX.
Initial Actions
Power Off/On
Procedure
•
Increase the allocated memory of the ART EX. (In some cases, actual memory must be
increased)
•
Change the print mode. (Example: High Quality mode
→
Normal mode)
•
Lower the resolution.
•
Set [Page Print mode] to [Enabled].
•
Execute [Image Compression] in the [Graphics] tab of the printer driver.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required