![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308152.webp)
BUS Updated 12/2011
07/2011
2-139
WorkCentre 5335 Family Service Documentation
013-220, 013-306
Status Indicator RAPs
Initial Issue
013-220 Folder Detect Fail RAP (LX)
BSD-ON:
BSD 12.17 - Office Finisher LX Folding
Control logic cannot detect the Folder Assembly.
Procedure
Execute
Component Control
[013-160], Folder Detected. The display is ‘Low.’
Y
N
There is less than 1 VDC at
P/J8990
pin 4.
Y
N
Check the wires between
P/J8990
pins 4 and 5. Make sure that
P/J8903
is securely
fastened.
Replace the Finisher PWB (
PL 23.16
).
Go to
BSD 12.17 - Office Finisher LX Folding
and check for an intermittent circuit.
013-306 Booklet Safety Switches Open RAP (LX)
BSD-ON:
BSD 12.13 - Office Finisher LX Booklet Interlock Switching
Control logic senses that one or more Booklet Safety Switch is open.
Initial Actions
Check for
013-307
Faults.
Procedure
There is +24 VDC between
P/J8993
pin 3 on the Booklet PWB and GND.
Y
N
There is +24 VDC between
P/J8993
pin 6 on the Booklet PWB and GND.
Y
N
Go to the
013-307
RAP
GO to
BSD 12.13 - Office Finisher LX Booklet Interlock Switching
and check the cir-
cuit through the Booklet Safety Switches (
PL 23.21
).
Replace the Booklet PWB (
PL 23.21
).