![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081191.webp)
BUS Updated 12/2011
07/2011
4-132
WorkCentre 5335 Family Service Documentation
REP 12.26
Initial Issue
Repairs & Adjustments
REP 12.26 Front /Rear Tamper Motor Assembly
Parts List on
PL 22.10
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the Integrated Office Finisher from the machine (
PL 22.1
).
3.
Remove the Compiler Assembly (
REP 12.20
)
4.
Remove the Bracket Assembly (
Figure 1
):
(1)Release Clamps (2) and remove the wire.
(2)Remove Screws (2).
(3)Remove Bracket Assembly.
Figure 1 Removing the Bracket Assembly
5.
Remove the KL-Clips from the Eject Shaft (
Figure 2
):
(1)Remove KL-Clips (2).
Figure 2 Removing the KL-Clips
6.
Remove the Eject Shaft from the Front/Rear Tamper Motor Assembly (
Figure 3
):
(1)Move Bearings (2) in the direction of the arrow.
(2)Remove Eject Shaft in the direction of the arrow.
(3)Remove Belt from Pulley.
Figure 3 Removing the Eject Shaft
7.
Remove the Front/Rear Tamper Motor Assembly (
Figure 4
):
(1)Remove Self-tapping Screws (2).