![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081194.webp)
BUS Updated 12/2011
07/2011
4-135
WorkCentre 5335 Family Service Documentation
REP 12.27, REP 12.28
Repairs & Adjustments
Initial Issue
Figure 4 Removing the Front Tamper Home Sensor
Replacement
1.
Reverse the removal procedure for replacement.
REP 12.28 Eject Clamp Home Sensor
Parts List on
PL 22.10
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the Integrated Office Finisher from the machine (
REP 12.1
).
3.
Turn over the Integrated Office Finisher.
4.
Remove the Bottom Cover (
PL 22.2
)
5.
Remove the Connector Bracket (
Figure 1
):
(1)Release Clamps (3) and remove the wire.
(2)Disconnect Connectors (5).
(3)Remove Screws (2).
(4)Remove Connector Bracket.
Figure 1 Removing the Connector Bracket
6.
Remove the Bottom Plate (
Figure 2
):
(1)Release Clamps (5) and remove the wire.
(2)Disconnect Connectors (8).
(3)Remove Wire from Hook.
(4)Remove Screws (4).
(5)Remove Bottom Plate.