![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081084.webp)
BUS Updated 12/2011
07/2011
4-23
WorkCentre 5335 Family Service Documentation
REP 5.10, REP 5.11
Repairs & Adjustments
Initial Issue
REP 5.10 Top Cover
Parts List on
PL 51.4
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the DADF Front Cover. (
REP 5.3
)
3.
Remove the DADF Rear Cover. (
REP 5.4
)
4.
Remove the DADF. (
REP 5.1
)
5.
Remove the DADF Document Tray. (
REP 5.9
)
6.
Remove the DADF Feeder Assembly. (
REP 5.5
)
7.
Remove the Registration Chute. (
REP 5.14
)
8.
Open the Top Cover.
9.
Remove the Top Cover. (
Figure 1
)
(1) Remove the self-tapping screw.
(2) Remove the Stud Bracket.
(3) Remove the Top Cover.
Figure 1 Top Cover Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
REP 5.11 Harness Guide and Wire Harness
Parts List on
PL 51.5
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the DADF Front Cover. (
REP 5.3
)
3.
Remove the DADF Rear Cover. (
REP 5.4
)
4.
Remove the DADF. (
REP 5.1
)
5.
Remove the DADF Document Tray. (
REP 5.9
)
6.
Remove the DADF Feeder Assembly. (
REP 5.5
)
7.
Remove the Registration Chute. (
REP 5.14
)
8.
Remove the Top Cover. (
REP 5.10
)
9.
Remove the wire harness from the Harness Guide. (
Figure 1
)
(1) Disconnect the connectors (x2).
(2) Remove the wire harness from the Harness Guide.
Figure 1 Wire Harness Removal
10. Remove the wire harness from the Harness Guide. (
Figure 2
)
(1) Remove the J753 wire harness from the Harness Guide.