![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308894.webp)
BUS Updated 12/2011
07/2011
2-900
WorkCentre 5335 Family Service Documentation
116-739, 116-740
Initial Issue
Status Indicator RAPs
116-739 Form/Logo Capacity RAP
BSD-ON:
BSD 16.1 - ESS
BSD-ON:
BSD 34.1 - FAX
Form/logo registration was not possible because of insufficient RAM disk or HDD capacity.
Initial Actions
Power Off/On
Procedure
•
Ask the customer to run the job again.
•
Ask customer to check the registered forms/logos using the Operation Panel utility, delete
the forms/logos that are unnecessary.
•
Refer customer to User Guide heading Data Encryption to check RAM usage.
•
Check the HDD electrical connections (
PL 35.2
).
•
Check the sw version of the controller sw - update if required
•
If the problem persists perform
Hard Disk Failure Prediction Test
.
•
Perform
GP 14
- only the first two parts - make sure to follow sequence and heed cau-
tions
1.
Job Log Clear Mode
2.
HDD Initialize Mode
•
Replace HDD (
PL 35.2
)
•
Replace ESS PWB (
PL 35.2
) (If not fixed by this, reinstall the original ESS PWB)
116-740 Arithmetic RAP
The number calculated in the interpreter exceeded the limit value.
Initial Actions
Power Off/On
Procedure
Upgrade the driver. Ask customer to cancel and rerun the job.