![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081089.webp)
BUS Updated 12/2011
07/2011
4-28
WorkCentre 5335 Family Service Documentation
REP 5.15, REP 5.16
Initial Issue
Repairs & Adjustments
REP 5.15 Retard Chute
Parts List on
PL 51.8
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the DADF Front Cover. (
REP 5.3
)
3.
Remove the DADF Rear Cover. (
REP 5.4
)
4.
Remove the DADF Document Tray. (
REP 5.9
)
5.
Open the Retard Chute.
6.
Remove the Retard Chute. (
Figure 1
)
a.
Remove the Retard Chute in the direction of the arrow.
Figure 1 Retard Chute
Replacement
1.
To install, carry out the removal steps in reverse order.
REP 5.16 Takeaway Roll
Parts List on
PL 51.9
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the DADF Front Cover. (
REP 5.3
)
3.
Remove the DADF Rear Cover. (
REP 5.4
)
4.
Remove the DADF. (
REP 5.1
)
5.
Remove the DADF Document Tray. (
REP 5.9
)
6.
Remove the DADF Feeder Assembly. (
REP 5.5
)
7.
Remove the Registration Chute. (
REP 5.14
)
8.
Remove the Top Cover. (
REP 5.10
)
9.
Remove the Harness Guide and the wire harness. (
REP 5.11
)
10. Loosen the Belt tension of the DADF Registration Motor. (
Figure 1
)
(1) Loosen the screws (x2).
Figure 1 DADF Reg Motor Belt Tension
11.
Remove the DADF Registration Motor and the Bracket. (
Figure 2
)
(1) Remove the spring.
(2) Remove the screws (x2).
(3) Remove the DADF Registration Motor and the Bracket.
(4) Remove the Belt.