![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081048.webp)
BUS Updated 12/2011
07/2011
3-27
WorkCentre 5335 Family Service Documentation
Image Quality
Initial Issue
IQS12 Magnification Specification
Procedure
Use Side B of the Standard Test Pattern.
The tolerance for each magnification setting in the lead edge to trail edge direction and the
front to rear direction are listed in Table below.
Refer to
Figure 1
for the areas to be measured. For 65% and 101%, use areas A and B for the
magnification in the lead edge to trail edge direction; and areas C and D for magnification in
the front to rear direction. For 154% use areas A and E for magnification in the lead edge to
trail edge direction; and areas C and F for magnification in the front to rear direction.
Figure 1 Areas of Side B to be Measured
Table 1 Magnification Specifications
Magnification(%)
Measurement
65
130+/-2mm
101
202+/-2mm
154
154+/-2mm