![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081145.webp)
BUS Updated 12/2011
07/2011
4-85
WorkCentre 5335 Family Service Documentation
REP 10.4, REP 10.5
Repairs & Adjustments
Initial Issue
4.
Remove the Exit Sensor Plate Assembly (
Figure 3
).
a.
Remove the Screw (1).
b.
Disconnect the connector.
Figure 3 Removing Screw
Replacement
1.
To install, carry out the removal steps in reverse order.
REP 10.5 Exit 2 Transport Assembly
Parts List on
PL 17.4
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the following covers (
Figure 1
).
a.
Fax Cover.
b.
Rear Upper Cover (2 Screws).
Figure 1 Removing Covers
3.
Perform the following (
Figure 2
).
a.
Open the Front Cover and the Left Hand Cover.
b.
Remove the Xerographic Cartridge and the Toner Cartridge.
Figure 2 Removals
a
b
a
b
a
b