![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081078.webp)
BUS Updated 12/2011
07/2011
4-17
WorkCentre 5335 Family Service Documentation
REP 5.5
Repairs & Adjustments
Initial Issue
Figure 2 DADF Feeder Assembly Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
Align the positioning pin of the Base Frame and the hole of the DADF Feeder Assembly.
(
Figure 3
)
Figure 3 Align the Positioning Pin
3.
When installing the Feeder Assembly to the Base Frame, check the following (
Figure 4
)
(A) At the front: The Frame of the DADF Feeder Assembly is attached to the positioning
pin of the Base Frame as shown in the figure.
(B) The Bracket of the DADF Feeder Assembly is attached to the support of the Base
Frame as shown in the figure.
Figure 4 Installing the Feeder Assembly to the Base Frame
4.
Go to
HFSI Counter
and reset Counter 955-806.