![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081207.webp)
BUS Updated 12/2011
07/2011
4-149
WorkCentre 5335 Family Service Documentation
REP 13.15, REP 13.16
Repairs & Adjustments
Initial Issue
Figure 3 Removing the Stapler Motor
Replacement
1.
Reverse the removal procedure for replacement.
REP 13.16 Finisher Stapler Assembly (Office Finisher LX)
Parts List on
PL 23.8
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the Creaser Knife Assembly (
REP 13.18
).
3.
Remove the Front Cover Assembly (
REP 13.6
).
4.
Remove the Stapler Cover (
Figure 1
).
(1) Remove the Screw.
(2) Remove the Stapler Cover.
Figure 1 Removing the Stapler Cover
5.
Remove the Finisher Stapler Assembly (
Figure 2
).
(1) Disconnect the Connectors (2).
(2) Remove the Screws (3).
(3) Remove the Finisher Stapler Assembly.
Cable Clamp
Connector
Screws
Stapler Motor
Stapler
Cover
Screw