![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308993.webp)
BUS Updated 12/2011
07/2011
2-1002
WorkCentre 5335 Family Service Documentation
133-220, 133-221
Initial Issue
Status Indicator RAPs
133-220 Fax Control Task RAP
BSD-ON:
BSD 34.1 - FAX
An error during Fax Controller software processing caused a Fax shutdown.
Procedure
•
Turn the power Off/On.
•
Check the USB connection. If OK then replace the USB cable (
PL 18.5
).
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the PWB’s in the FAX Module)
•
Check the sw version of the fax & controller sw - update if required
•
Perform FAX Diagnostic
GP 13
•
Replace the Fax PWB (
PL 18.5
)
133-221 Fax Card Boot RAP
BSD-ON:
BSD 34.1 - FAX
The FAX PWB did not respond within the specified time to boot.
Procedure
•
Turn the power Off/On.
•
Check the USB connection. If OK then replace the USB cable (
PL 18.5
).
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the PWB’s in the FAX Module)
•
Check the sw version of the fax & controller sw - update if required
•
Perform FAX Diagnostic
GP 13
•
Replace the Fax PWB (
PL 18.5
)