![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081172.webp)
BUS Updated 12/2011
07/2011
4-113
WorkCentre 5335 Family Service Documentation
REP 12.13
Repairs & Adjustments
Initial Issue
Figure 2 Removing the Upper Chute Assembly
8.
Remove the Entrance Roll Assembly (
Figure 3
):
(1)Disconnect Spring.
(2)Remove E-Rings (2).
NOTE: Capture the Bearing
(3)Remove Arm.
(4)Slide Shaft out of the Bearing in the Arm.
Figure 3 Removing the Gear
Replacement
1.
Reverse the removal procedure for replacement.
NOTE: Ensure that the Paper Guides on the Upper Chute (
PL 22.6
) are not folded back
on top of the Exit Roll Assembly.