![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308076.webp)
BUS Updated 12/2011
07/2011
2-60
WorkCentre 5335 Family Service Documentation
003-978, 003-980
Initial Issue
Status Indicator RAPs
003-978 Color Document Mismatch RAP
Color Document Mismatch (Multi Scan).
1.
Document replacement was detected during Bound Originals/Booklet/Poster scanning
2.
When any operation that requires Return Document occurs in the job with Multi Scan
(Bound Originals/Booklet/Poster) on Platen, a user returned a document of a different
color at ACS.
Procedure
•
Reload a correct size paper and resume operation.
•
If powering OFF then ON does not resolve the problem, perform the following:
1.
Disconnect then reconnect the harness between the IIT PWB and ESS, MCU all
PWBs connected to them (RAM, Firmware module, EEPROM)
2.
Check the sw version of the controller sw - reload Software (
GP 16
)
3.
Replace IIT PWB (Switch the EEPROM) (
PL 1.6
).
4.
Replace ESS PWB (
PL 35.2
).
003-980 Staple Position RAP
Stapling could not be done at the specified position.
Procedure
•
Specify a Staple position again or cancel Staple, and execute the same job again.
•
Disconnect then reconnect the harness between the IIT PWB and ESS, MCU all PWBs
connected to them (RAM, Firmware module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)