![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081083.webp)
BUS Updated 12/2011
07/2011
4-22
WorkCentre 5335 Family Service Documentation
REP 5.9
Initial Issue
Repairs & Adjustments
Figure 2 DADF Set LED Connector Removal
6.
At the front side of the DADF Document Tray, remove the boss of the DADF Document
Tray from the installation hole of the Frame. (
Figure 3
)
(1) Position the DADF Document Tray vertically.
(2) Press the boss of the DADF Document Tray in the direction of the arrow and
remove it from the installation hole.
(3) Remove the wire harness of the DADF Document Set LED from the groove of the
Frame.
Figure 3 Boss Removal
7.
Pull out and remove the wire harness at the rear side of the DADF Document Tray from
the hole of the Frame. (
Figure 4
)
(1) Pull out and remove the wire harness through the hole on the Frame.
Figure 4 Wire Harness Removal
Replacement
1.
To install, carry out the removal steps in reverse order.