![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308418.webp)
BUS Updated 12/2011
07/2011
2-409
WorkCentre 5335 Family Service Documentation
024-917, 024-926
Status Indicator RAPs
Initial Issue
024-917 Stacker Tray Staple Set Over Count RAP
BSD-ON:
BSD 3.1 - ESS - MCU Communication
BSD-ON:
BSD 12.8 - Integrated Finisher Stacker Tray Control
BSD-ON:
BSD 12.24 - Office Finisher LX Stacker Tray Control
BSD-ON:
BSD 16.1 - ESS
The number of stapled copies exceeded the capacity of the Stacker Tray.
Initial Actions
•
Power Off/On
•
Empty the tray
Procedure
Check the connection of each Finisher PWB connector. The connectors are securely con-
nected.
Y
N
Connect the connectors.
Turn on the power again. [024-917] reoccurs.
Y
N
Return to Service Call Procedures.
Check the Stacker Tray No Paper Sensor operation and circuit (
BSD 12.24 - Office Finisher LX
Stacker Tray Control
. If the sensor fails, replace it,
PL 23.7
Finisher LX)
024-926 Puncher Waste Bin Not Set RAP
BSD-ON:
BSD 12.15 - Office Finisher LX Punch
The Puncher Waste Bin is not installed correctly or there is a failure in the Punch Box Set Sen-
sor or related circuitry.
Initial Actions
•
Remove and reinstall the Puncher Waste Bin to its correct location.
•
Check for any debris or obstructions in the path of the Punch Waste Bin or the Punch Box
Set Sensor.
Procedure
Enter
Component Control
[012-275]. and remove and reinstall the Punch Waste Bin. The dis-
play changes.
Y
N
Check the circuit of the Punch Box Set Sensor on
BSD 12.15 - Office Finisher LX
Punch
. Check the wires and connectors for an intermittent open or short circuit. If the
problem continues, replace the Finisher PWB (
PL 23.16
).
Check the sw version of the controller sw - update if required (
GP 16
) If OK, Replace the Fin-
isher PWB (
PL 23.16
).