![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308091.webp)
BUS Updated 12/2011
07/2011
2-76
WorkCentre 5335 Family Service Documentation
005-906, 005-907
Initial Issue
Status Indicator RAPs
005-906 DADF Feed Out Sensor Static Jam RAP
BSD-ON:
BSD 5.5 - Document Feed (2 of 2)
The DADF Feed Out Sensor turns ON at the following timings.
1.
When Power is ON
2.
At Feeder Cover Interlock Close
3.
At Platen Interlock Close
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
•
Check the DADF Feed Out Sensor for remaining paper, the Actuator for return failure, for-
eign substances, contamination on sensors, and etc.
•
DADF Feed Out Sensor:
Component Control
[005-205] (
PL 51.6
)
•
Check the sw version of the controller sw - update if required
•
If the problem persists, check the circuit between the DADF Feed Out Sensor and the
DADF PWB. If no problems are found, replace the DADF PWB (
PL 51.2
).
005-907 DADF Pre Registration Sensor Static Jam RAP
BSD-ON:
BSD 5.5 - Document Feed (2 of 2)
The DADF Pre Registration Sensor turns ON at the following timings:
1.
When Power is ON
2.
At Feeder Cover Interlock Close
3.
At Platen Interlock Close
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
•
Check the DADF Pre Registration Sensor for remaining paper, the Actuator for return fail-
ure, foreign substances, contamination on sensors, and etc.
•
DADF Pre Registration Sensor:
Component Control
[005-206] (
PL 51.17
)
•
Check the sw version of the controller sw - update if required
•
If the problem persists, check the circuit between the DADF Pre Registration Sensor and
the DADF PWB. If no problems are found, replace the DADF PWB (
PL 51.2
).