BUS Updated 12/2011
07/2011
2-493
WorkCentre 5335 Family Service Documentation
027-741 , 027-742
Status Indicator RAPs
Initial Issue
027-741 Template Server Connect RAP
The system failed in obtaining data connection or list data while connecting to the Job Tem-
plate Pool Server using the FTP command “LIST”.
Procedure
•
Connect the network cable from the machine correctly.
•
From the destination server, use “ping” to check that the machine can be “seen”.
•
Perform the “ping” test on the destination server from the PSW.
•
From a client PC, check that FTP connection to the destination server is possible.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required (
GP 6
,
GP 16
)
027-742 HDD File System RAP
The HDD is full when writing to a local HDD Job Template or when writing temporary work files.
Initial Actions
Power Off/On
Procedure
•
Delete the files in the HDD. Or, initialize the HD.
•
Scanned images may cause the HDD to be full. Wait for a while and try again.
•
Disconnect then reconnect the HDD, ESS, MCU all PWBs connected to them (RAM,
Firmware module, EEPROM)
•
Check the sw version of the controller sw - update if required
•
Perform
GP 14
- only the first two parts - make sure to follow sequence and heed cau-
tions
1.
Job Log Clear Mode
2.
HDD Initialize Mode
•
Replace HDD (
PL 35.3
)
•
Replace ESS PWB (
PL 35.2
) (If not fixed by this, reinstall the original ESS PWB)