![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308429.webp)
BUS Updated 12/2011
07/2011
2-420
WorkCentre 5335 Family Service Documentation
024-961, 024-962
Initial Issue
Status Indicator RAPs
024-961 Tray 3 Size Mismatch RAP
BSD-ON:
BSD 7.3 - Tray 3 Paper Size Sensing (TTM)
The paper size in Tray 3 and the paper size specified for printing are different.
Initial Actions
Load the correct size paper in Tray 3.
Procedure
•
Go to the
073-212
RAP.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required (
GP 16
)
024-962 Tray 4 Paper Size Mismatch RAP
BSD-ON:
BSD 7.4 - Tray 4 Paper Size Sensing (TTM)
Procedure
•
.Go to the
074-212
Tray 4 Paper Size Sensor RAP.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - update if required (
GP 16
)