![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081216.webp)
BUS Updated 12/2011
07/2011
4-158
WorkCentre 5335 Family Service Documentation
REP 13.17
Initial Issue
Repairs & Adjustments
Figure 16 Installing the Bushing and E-ring
11.
Ensure that the Set Clamp Holder Springs are connected (
Figure 17
).
Figure 17 Attaching the Set Clamp Holder Springs
12. Install the Eject Roll Shaft.
(1) Place the Eject Roll Shaft into position in the front and rear frame (
Figure 18
).
Install
the
Bush-
ing and
the E-
ring
Spring attaches in 2
spots