![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308077.webp)
BUS Updated 12/2011
07/2011
2-61
WorkCentre 5335 Family Service Documentation
003-981, 003-982
Status Indicator RAPs
Initial Issue
003-981 Staple Size RAP
Staple size error (Copy APS). Stapling could not be done for the selected paper size.
Procedure
•
Specify a Staple position again or cancel Staple, and execute the same job again.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)
003-982 IITsc HDD Access Error RAP
HD-FULL was detected with no pages stored. An error where the FULL is not cleared even
after some time has passed.
Procedure
•
Disconnect then reconnect the HDD, ESS, MCU all PWBs connected to them (RAM,
Firmware module, EEPROM)
•
Perform
GP 14
- only the first three parts - make sure to follow sequence and heed cau-
tions
•
If the problem persists, expand the HDD partition size of the Copy service.
•
If the problem persists, go to
Hard Disk Failure Prediction Test
.
•
Check the sw version of the controller sw - reload Software (
GP 16
)
•
Replace HDD (
PL 35.2
)
•
Replace ESS PWB (
PL 35.2
) (If not fixed by this, reinstall the original ESS PWB and RAM
DIMM.