![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081087.webp)
BUS Updated 12/2011
07/2011
4-26
WorkCentre 5335 Family Service Documentation
REP 5.12, REP 5.13
Initial Issue
Repairs & Adjustments
Figure 2 Belt Installation
REP 5.13 DADF Feed Motor
Parts List on
PL 51.5
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the DADF Front Cover. (
REP 5.3
)
3.
Remove the DADF Rear Cover. (
REP 5.4
)
4.
Remove the DADF. (
REP 5.1
)
5.
Remove the DADF Document Tray. (
REP 5.9
)
6.
Remove the DADF Feeder Assembly. (
REP 5.5
)
7.
Remove the Registration Chute. (
REP 5.14
)
8.
Remove the Top Cover. (
REP 5.10
)
9.
Remove the Harness Guide and the wire harness. (
REP 5.11
)
10. Turn the DADF Feeder Assembly upside down.
11.
Remove the DADF Feed Motor. (
Figure 1
)
(1) Remove the spring.
(2) Remove the screws (x2).
(3) Remove the DADF Feed Motor.
Figure 1 DADF Feed Motor Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
Install the Belt to the Pulley of the DADF Feed Motor. (
Figure 2
)