![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081199.webp)
BUS Updated 12/2011
07/2011
4-141
WorkCentre 5335 Family Service Documentation
REP 13.5
Repairs & Adjustments
Initial Issue
REP 13.5 Finisher LX Undocking
Parts List on
PL 23.1
Removal
1.
Switch off the power and disconnect the Printer power cord.
2.
Disconnect the Finisher Power Cord, the H-Transport Connector and the Finisher Con-
nector from the IOT.
CAUTION
The Finisher is unstable when not docked with the Printer. Use care when handling an
undocked Finisher so that it does not fall over.
3.
Rotate the Feet (2) to free the Finisher. (
Figure 1
)
Figure 1 Finisher Feet
4.
Open the Front Door of the Finisher.
5.
Release the Screw that secures the Docking Plate and detach the Finisher.
(1) Remove the Screw.
(2) Pull the Docking Plate Lever towards you and detach the Finisher.(
Figure 2
).
Figure 2 Finisher Lever
Replacement
1.
Align the Printer Docking Bracket with the cut outs in the Finisher Docking Bracket.
2.
Mate the Printer and the Finisher until it latches.
3.
Check that the Finisher is firmly latched to the Printer.
4.
Perform the remainder of the replacement procedure in reverse order of removal.
1
Rotate the Feet
1
Screw
2
Docking Plate
Lever