![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081040.webp)
BUS Updated 12/2011
07/2011
3-19
WorkCentre 5335 Family Service Documentation
Image Quality
Initial Issue
IQS4 Lead Edge Registration Specification
Procedure
Use Side A of the Standard Test Pattern.
The center 10 mm reference line on the copy must be 10 mm (plus or minus the ranges listed
in the following charts) from the lead edge of a 100% copy (
Figure 1
).
Figure 1 Lead Edge Registration
Table 1 Specification of Lead Edge Registration
Configuration
Range
Platen (Simplex)
+/-1.6mm
Platen (Duplex)
+/-2.0mm
Platen (MPT)
+/-2.2mm
DADF (Simplex)
+/-2.2mm
DADF (Duplex)
+/-3.0mm