![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081243.webp)
BUS Updated 12/2011
07/2011
4-185
WorkCentre 5335 Family Service Documentation
REP 19.7, REP 19.8
Repairs & Adjustments
Initial Issue
Replacement
NOTE: Make sure the plastic pads on the Lower Chute fit in the track before pushing it in.
1.
To install, carry out the removal steps in reverse order.
REP 19.8 HCF Nudger Bracket/Nudger Lever/Torsion
Spring
Parts List on
PL 10.4
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the HCF Feed Shaft (
REP 19.6
)
3.
Disassemble the Feed Shaft by removing (4) E-Rings and unscrewing the Nudger Sup-
port that retains the Torsion Spring.
Replacement
1.
Install replacement parts.
2.
Carry out the removal steps in reverse order.