![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081134.webp)
BUS Updated 12/2011
07/2011
4-73
WorkCentre 5335 Family Service Documentation
REP 9.1
Repairs & Adjustments
Initial Issue
18. Remove the HVPS (
Figure 16
).
a.
Release the wire harness from the clamp, and disconnect the connector.
b.
Remove the Screws (2).
c.
Pull the HVPS out.
Figure 16 Removing Screws
19. Perform the following (
Figure 17
).
a.
Release the Xerographic Module Connector from the frame.
b.
Remove the Cartridge Guide top Screws (2).
Figure 17 Removing Screws
20. Release the BTR Contact Cover from the frame (2 locking tabs) (
Figure 18
).
Figure 18 Removal
21. Remove the Xerographic Cartridge Guide Assembly (
Figure 19
).
a.
Remove the left side Screws (2).
b.
Remove the guide, routing the front and rear wire harnesses through the frame
openings.
Figure 19 Removing Screws
Replacement
1.
To reinstall, carry out the removal steps in reverse order.
b
a
b
a
20
b
a