Toucan LT board printer
Setup and Operating instructions
Unpack the Toucan LT board printer as you would any Toucan LT. Follow all cautions
associated with installing a standard Toucan LT.
Change in ‘wash’ instructions:
Proceed with a single ‘wash’ with Head conditioner because the printer has been ‘inked’ up
and tested during the manufacture of the ‘board’ printer.
Remember to verify ‘flow’ of liquids through the printer during the ‘wash’ and ‘ink fill’.
Complete the installation of the Toucan LT:
Align the printheads and print the copies of the Adjustment Parameter sheet and Test
prints. One set are to be stored in the left end of the printer and one set to return to Mutoh
America Inc. Follow the published Toucan LT installation document.
February 21, 2006 1/12 Toucan LT board printer setup
