![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081208.webp)
BUS Updated 12/2011
07/2011
4-150
WorkCentre 5335 Family Service Documentation
REP 13.16, REP 13.17
Initial Issue
Repairs & Adjustments
Figure 2 Removing the Finisher Stapler Assembly
Replacement
Reverse the removal procedure for replacement.
Perform
ADJ 12.2
Finisher LX Booklet Crease/Staple Position
REP 13.17 Compiler Tray Assembly (Office Finisher LX)
Parts List on
PL 23.12
Removal
1.
Switch off the power and disconnect the power cord.
2.
Undock the Finisher (
REP 13.5
).
3.
Remove the Front Cover (
REP 13.6
).
4.
Remove the Rear Upper Cover (
REP 13.7
).
5.
Remove the Foot Cover (
REP 13.10
).
6.
Remove the Stacker Lower Cover (
REP 13.11
).
7.
Remove the Stacker Tray (
REP 13.20
).
8.
Remove the Stacker Upper Cover (
REP 13.12
).
9.
Remove the Eject Cover (
REP 13.9
).
10. Preparing to remove the Eject Roller Shaft (
Figure 1
).
Figure 1 Removing the E-ring and brass bearing
11.
Remove the Eject Roll Shaft (
Figure 2
).
(1) Remove the E-ring and brass bearing from the front of the shaft.
(2) Remove the E-ring,
(3) Slide the Eject Roller shaft toward the front.
(4) Remove the Gear, and brass bushing.
(5) Remove the Eject Roll from the Finisher.
Screws (3)
Connectors (2)
Finisher Stapler Assembly