![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081175.webp)
BUS Updated 12/2011
07/2011
4-116
WorkCentre 5335 Family Service Documentation
REP 12.16
Initial Issue
Repairs & Adjustments
REP 12.16 Stacker Tray Assembly
Parts List on
PL 22.8
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the Integrated Office Finisher from the machine (
REP 12.1
).
3.
Remove the Inner Front Cover (
PL 22.1
)
4.
Remove the Rear Cover (
PL 22.1
)
5.
Turn over the Integrated Office Finisher.
6.
Remove the Bottom Cover (
PL 22.2
)
7.
Remove the Tray Cover (
PL 22.2
)
8.
Disconnect Connector (
Figure 1
):
(1)Release Clamp.
(2)Remove Clamp.
(3)Release and remove Wire from Hook.
(4)Release Clamp.
(5)Disconnect Connector.
(6)Release and remove Wire from Hook.
Figure 1 Disconnecting the Connector
9.
Release the Clamps and the Hook to remove the wire (
Figure 2
):
(1)Release Clamps (5).
(2)Remove Wire from Hook.
Figure 2 Disconnecting the Wire
10. Remove the Stacker Sensor Assembly (
Figure 3
):
(1)Remove Screw.
(2)Remove Stacker Sensor Assembly.
(3)Release Clamps (4).
(4)Disconnect Connectors (2).
Figure 3 Removing the Stacker Sensor Assembly
11.
Remove the Stacker Tray Assembly (
Figure 4
):
(1)Remove Screws (5).
(2)Remove Stacker Tray Assembly.