![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081214.webp)
BUS Updated 12/2011
07/2011
4-156
WorkCentre 5335 Family Service Documentation
REP 13.17
Initial Issue
Repairs & Adjustments
Figure 12 Preparing to install the Holder Springs
6.
Install the Bushing, Spring and Gear onto the rear end of the Set Clamp Shaft (
Figure 13
).
Figure 13 Installing the Bushing, Spring and Gear
7.
Rotate the Set Clamp Shaft until the Stack Height Sensor Flag is in the correct position
then position the 2 gears into the configuration (
Figure 14
).
Holders and Springs in cor-
rect location on the Shaft
1
Bearing
2
Spring
3
Gear
4
Install the Stack Height Sensor Flag onto
the rear end of the Shaft as shown