![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308062.webp)
BUS Updated 12/2011
07/2011
2-46
WorkCentre 5335 Family Service Documentation
003-931, 003-932
Initial Issue
Status Indicator RAPs
003-931 400 DPI Scan RAP
BSD-ON:
BSD 3.5 - ESS-DADF Communication
For scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available. Because
Page Memory is not enough, a selected resolution is not available for scanning a A3 docu-
ment. It is available for scanning a A4/B4 document.
Procedure
•
Verify scan settings are correctly set (at below 400dpi) and menu selections are correctly
set. Increase Page Memory (
PL 35.2
).
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)
003-932 600 DPI Scan RAP
BSD-ON:
BSD 3.5 - ESS-DADF Communication
For scanning in the DADF mix duplex mode, 600dpi is not available.
Procedure
•
Verify scan settings (scanning at below 600dpi) are correctly set and menu selections are
correctly set. Increase Page Memory (
PL 35.2
).
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)