![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081206.webp)
BUS Updated 12/2011
07/2011
4-148
WorkCentre 5335 Family Service Documentation
REP 13.15
Initial Issue
Repairs & Adjustments
REP 13.15 Stapler Motor (Office Finisher LX)
Parts List on
PL 23.8
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the Finisher Stapler Assembly (
REP 13.16
).
3.
Remove the Screws (2) (
Figure 1
).
Figure 1 Removing the Screws
4.
Remove the Wire Guide (
Figure 2
).
(1) Pull out the Cable Clamps (3), and remove the wires from the Wire Guide.
(2) Remove the Screws (2).
(3) Remove the Wire Guide.
Figure 2 Removing the Wire Guide
5.
Remove the Stapler Motor (
Figure 3
).
(1) Remove the wires from the Cable Clamp.
(2) Disconnect the Connector.
(3) Remove the Screws (2).
(4) Remove the Stapler Motor.
Screws
Cable Clamps
Screws
Wire Guide