![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_884308061.webp)
BUS Updated 12/2011
07/2011
2-45
WorkCentre 5335 Family Service Documentation
003-795, 003-930
Status Indicator RAPs
Initial Issue
003-795 AMS Limit RAP
AMS (Auto R/E) limit error. (The R/E ratio became out of range after the document auto detec-
tion when AMS is specified.)
Initial Actions
Ask customer to abort the job. Enter the correct R/E ratio or change the paper size.
Procedure
•
Disconnect then reconnect the IIT, ESS, MCU all PWBs connected to them (RAM, Firm-
ware module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)
•
Replace IIT PWB (Switch the EEPROM) (
PL 1.6
)
003-930 300 DPI Scan RAP
BSD-ON:
BSD 3.5 - ESS-DADF Communication
300dpi/400dpi/600dpi disabled with DADF Mix Duplex Mode Scan. Due to insufficient Page
Memory space, A3 original cannot be scanned with specified resolution. A4/B4 original can be
scanned. There is a problem scanning 300 DPI.
Procedure
•
Increase Page Memory (
PL 35.2
). Verify scan settings are correctly set and menu selec-
tions are correctly set. Scan with 300dpi or less.
•
Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
•
Check the sw version of the controller sw - reload Software (
GP 16
)