![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081109.webp)
BUS Updated 12/2011
07/2011
4-48
WorkCentre 5335 Family Service Documentation
REP 6.8, REP 6.9
Initial Issue
Repairs & Adjustments
Figure 2 Light Guide Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
When installing the Light Guide, insert the boss of the Light guide into the positioning hole
of the Full Rate Carriage.
REP 6.9 Carriage Motor
Parts List on
PL 1.6
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the following parts:
•
DADF (
REP 5.1
)
•
Filter Cover (
PL 19.2
)
•
Rear Upper Cover (
PL 19.2
)
•
IIT Right Cover (
PL 1.1
)
•
IIT Rear Cover (
PL 1.1
)
•
IIT Top Cover (
PL 1.1
)
3.
Remove the Carriage Motor (
Figure 1
)
(1) Disconnect the connector.
(2) Remove the spring.
(3) Remove the screws (x3).
(4) Remove the Carriage Motor.
Figure 1 Carriage Motor Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
Install the Belt to the Pulley of the Carriage Motor (
Figure 2
)