background image

1  Safety Precautions

Safety Precautions  .............................................2

3  Basic Operations

Turning the Printer On and Off  ...........................8
Loading a Roll ................................................... 11
Loading Sheets Manually  .................................18
Printing from Windows ......................................22
Printing from Mac OS X  ....................................25
Printing from Mac OS 9  ....................................28

4  Maintenance

Replacing Ink Tanks  .........................................31
Cleaning the Printer  ..........................................38
Checking for Nozzle Clogging  ..........................43
Cleaning the Printhead  .....................................44
Adjusting the Printhead Alignment Automatically  ..45
Adjusting the Feed Amount Automatically  ........47

5  Troubleshooting

Responding to Messages  .................................48
Troubleshooting If You Cannot Print  .................60
Troubleshooting If You Cannot Print as Expected  ..64
Clearing Jammed Roll Paper ............................73
Clearing a Jammed Sheet  ................................78

6  Consumables

Consumables ....................................................81

7  Appendix

Index  .................................................................83

ENG

2  imagePROGRAF Support 

Information

imagePROGRAF Support Information  ...............6

Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future referencing.

Summary of Contents for iPF710 - imagePROGRAF Color Inkjet Printer





























































































Reviews: