![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081103.webp)
BUS Updated 12/2011
07/2011
4-42
WorkCentre 5335 Family Service Documentation
REP 6.5
Initial Issue
Repairs & Adjustments
Figure 6 Carriage Cable
2.
Wind the Carriage Cable at the spring end around the pulley for 2.5 rounds (
Figure 7
)
(1) Wind the cable 2.5 rounds.
(2) Fix the cable at the spring end on the Frame with tape.
Figure 7 Winding Carriage Cable
3.
Wind the Carriage Cable at the ball end around the pulley for 3 rounds (
Figure 8
)
(1) Wind the cable 3 rounds.
(2) Fix the cable wound on the pulley with tape to prevent it from getting loose.
Figure 8 Taping Carriage Cable
The figure below shows the number of rounds made by Carriage Cable at the front and
rear (
Figure 9
)
Figure 9 Front and Rear Carriage Cable
4.
Install the ball end of the Carriage Cable (
Figure 10
)
(1) Hang the cable on the pulley at the front of the Half Rate Carriage.
(2) Hang the ball on the notch of the Frame.