![background image](http://html.mh-extra.com/html/xerox/workcentre-5335-series/workcentre-5335-series_service-manual_8843081082.webp)
BUS Updated 12/2011
07/2011
4-21
WorkCentre 5335 Family Service Documentation
REP 5.8, REP 5.9
Repairs & Adjustments
Initial Issue
Figure 2 Right Counter Balance Removal
Replacement
1.
To install, carry out the removal steps in reverse order.
2.
If it was replaced, perform checking for DADF Lead-Skew Adjustment. (
ADJ 5.1
)
REP 5.9 DADF Document Tray
Parts List on
PL 51.4
Removal
1.
Switch off the power and disconnect the power cord.
2.
Remove the DADF Front Cover. (
REP 5.3
)
3.
Remove the DADF Rear Cover. (
REP 5.4
)
4.
Disconnect the connector of the DADF Document Set LED. (
Figure 1
)
(1) Remove the self-tapping screw.
(2) Remove the LED Bracket.
(3) Remove the wire harness from the hook.
(4) Disconnect the connector.
Figure 1 DADF Set LED Connector
5.
Disconnect the connector. (
Figure 2
)
(1) Remove the clamp.
(2) Disconnect the connector of the P/J756.
(3) Remove the P/J756 wire harness from the Harness Guide.