S a v e M o n e y a n d I m p r o v e Y o u r P r i n t i n g
MIS Associates Inc 2901 Auburn Rd Auburn Hills, MI 48326 800-445-8296
http://www.inksupply.com Fax: 248-289-6013 Email: [email protected]
Canon Pixma iP6000 Installation Instructions
Installation Procedure
Canon Pixma iP6000 with MIS CFS Installed
Prerequisite
-
Before starting this installation, you MUST test your printer to make sure it is printing 100%
correctly. The best way to do this is to first print a Nozzle pattern, using the printer utility
software provided by Canon. Once a perfect nozzle pattern is achieved, print 5 copies of the
MIS
purge6.tif
image using the Plain Paper and Standard Quality settings on the printer. All 5
pages must print without banding or skipping (white spaces). If your printer can not do this,
do
not
install the CFS. Run some cleaning cycles or get new cartridges. Do not proceed until you
can pass these tests. The Purge6 image can be found on the diskette included with your
system. If you have a Mac you can download it from our website. You can also get it from the
Helpdesk Download Library.
Tools & Materials Needed
-
MIS CFS System, ink, and a working Canon iP6000 printer
