Gambro AK 96, Operator'S Manual, Page: 84 / 509

Cursors
When a menu is shown on the Information Display, each position of
the menu can be pointed out by the use of a cursor. There are four
different cursors, three of them can be manually moved by the operator
using the Cursor keys . One has a fi xed position on the menu.
Upper Cursor
This cursor indicates that the position has been selected and is possible
to open by using the Select key . If the position holds a function, the
subsection will be entered and a new menu will appear. If the position
holds a parameter the cursor will move to the lower position. The
Upper Cursor can be moved within the menu to select another position
by using the Cursor keys .
Lower Cursor
This cursor indicates that the position has been opened and it is
possible for the operator to change the value of the parameter using the
Display Up/Down keys . After the proper value has been set, close
the position using the Select key and the cursor will move to the next
position of the menu.
Cursor Brace
This cursor indicates that the position has been pre selected. The cursor
can be moved within the menu to select another position by using the
Cursor keys .
Display Brace
This cursor has a fi xed position and displays the value of a parameter.
The position cannot be entered or moved by the operator.
Overview Displays
The Treatment Overview Menu will start to be displayed and continues
to be displayed at all times during treatment when blood is detected.
Current parameter values during treatment are displayed here.
Activated functions are displayed at the bottom of the overview menus,
in the activity fi eld.
The Treatment Overview Menu is divided up in two parts, both
showing current treatment parameters and which functions are
activated at the moment. Switch between the two parts using the
Back key . The fi rst part containing current blood fl ow rate is always
present when the treatment is ongoing but can easily be changed to the
second part using the Back key . The second part will then be displayed
for 20 seconds and after this the fi rst part will automatically return.
When any other menu is displayed during treatment, the Back key can
be pressed for 3 seconds if the Treatment Overview Menu is to be
immediately displayed.
HCEN12239 Revision 12.2010
Program version 3.xx
AK 96 ® Operator's Manual - Operating the Machine 3:23