Gambro AK 96, Operator'S Manual, Page: 246 / 509

Connection of external equipment
External connector 25 pin D-Sub with RS-232C or
RS-422/Current loop. Opto insulated
ful fi lling IEC 60601-1-1.
External equipment
Additional equipment connected to medical electrical equipment must
comply with the respective IEC or ISO standards (e.g. IEC 60950
for data processing equipment).
Furthermore all con fi gurations shall comply with the requirements
for medical electrical systems (see IEC 60601-1-1 or clause 16 of the
3Ed. of IEC 60601-1, respectively).
Anybody connecting additional equipment to medical electrical
equipment con fi gures a medical system and is therefore responsible
that the system complies with the requirements for medical electrical
systems. Attention is drawn to the fact that local laws take priority
over the above mentioned requirements. If in doubt, consult your local
representative or the technical service department.
Extern alarm
Max voltage 24 V AC or DC
Max current
100 mA AC or DC
RS-232C
Max input voltage ± 15 V DC
High level min output
voltage
5.0 V DC
Low level max output
voltage
- 5.0 V DC
Max output current ± 5 mA DC
RS-422/Current loop
Typ current
20 mA DC
Max current
50 mA DC
Battery Back-up
Battery back-up of power
supply
24 V, 7.0 Ah
Battery type Sealed Lead Acid, 2 x 12 V
Running time >30 minutes
Fuse
12 AT
HCEN12239 Revision 12.2010
Program version 3.xx
AK 96 ® Operator's Manual - Technical Data 9:13