Gambro AK 96 Operator'S Manual Download Page 183

Page: 183 / 509

The change of UF rate for the graph in intervals is determined by

the following settings; total UF volume, treatment time, number of

intervals in the graph and start UF rate. Based on these parameters, the

machine will perform adjustments of the UF rate at intervals during the

treatment time when pro

ling has been activated. See the following

gure.

Figure 7:4

Graph in intervals for UF rate pro

ling

For all the UF rate graphs, the operator is requested to readjust the

TMP alarm limits during treatment in accordance with the UF rate

and the dialyzer UF coef

cient.

7:4

AK 96

Operator's Manual - Proﬁling

HCEN12239 Revision 12.2010

Program version 3.xx

Summary of Contents for AK 96






























































































































































































































































































































































































































































































































Search results

Summary of Contents for AK 96

Reviews:

Gambro AK 96, Operator'S Manual, Page: 183 / 509

Search results

Summary of Contents for AK 96

Reviews: